Manual Series ZS4180 usoro
Machine description
1.The ntuziaka na-arụ ọrụ igwe mejupụtara a isi, a kọlụm, a na-ebuli table, a n'etiti trailer, a na-arụ ọrụ na tebụl na a spindle unit
2.PLC Program Control, nwoke-igwe interface friendly kwuo, kensinammuo mmemme mfe iji rụọ ọrụ, ndị nkịtị nwere ike ngwa ngwa na-amụta.
3.Sliding uwe ụdị abụọ spindle ntuziaka oriri unit, Korean dị pneumatic nnyefe worktable. The table adopts pneumatic ngwaọrụ na haịdrọlik echekwa i, na-akpụ akpụ, n'itinye ziri ezi bụ elu. Eliminates ochie ngwá mfe egosi na ịghasa na eri nwere malfunction.
4.Worktable mgbe elu ugboro nhazi, na-eyi na-eguzogide, elu-okpomọkụ, onwem na lubrication System.
5.Applied na valves, ịdị ọcha ike ngwaahịa, ụzọ akara hardware, ọkụ hydrants, akpaaka akụkụ ndị ọzọ nhazi, mfe iji rụọ ọrụ, mara mma anya, elu arụmọrụ.
Main oru oke:
| oke aha | unit | model | |||||
| ZS4180 × 2 | ZS4180 × 2A | ZS4180 × 2b | ZS4180 × 2C | ||||
| Dayameta nke spindle uwe | MM | 110 | |||||
| Ọnụ Ọgụgụ nke ịcha spindles | / | 2 | |||||
| Nzipu mode | / | First-ogbo Synchronous echebe mbanye | |||||
| Oke-egwu n'obosara | MM | 80 | |||||
| Oke tapping n'obosara | MM | 80 | |||||
| Spindle taper | # | NT40 | |||||
| Spindle pitch | MM | 240 | |||||
| Anya n'etiti spindle ọgwụgwụ ihu na worktable n'elu | MM | 240-580 | |||||
| Dimension Ọrụ Isiokwu | MM | 800 × 230 | |||||
| Isiokwu Travel (X) | MM | 250 | |||||
| Middle-adọkpụpụta njem (Y) | MM | 120 Manual Operation 120 | 150 Pneumatics 150 | ||||
| Spindle njem (mkpọpu ala / tapping) | MM | 140/140 | |||||
| Manual / Automatic ịme ọpịpị | / | Manual Operation | Automatic tapping | Manual Operation | Automatic tapping | ||
| Drilling spindle ọsọ | rpm | 1013 | |||||
| Ịme ọpịpị spindle ọsọ | rpm | 518 | |||||
| Ụdị egwu moto | / | 4KW / 4P 4KW / 4P | |||||
| Ụdị ịme ọpịpị moto | / | ||||||
| Total Power | KW | 8 | |||||
| Akụkụ (LXWXH) | mm | 1420 * 920 * 1800 | |||||
| Machine arọ | KW | 1300 | 1350 | 1300 | 1350 | ||
